Repair cost
Fisher & Paykel range burner & ignition repair cost
Ignitors, caps, ports, valves and thermocouples across gas ranges, cooktops and professional rangetops. Set at the low end because the commonest version of this call is a burner that was cleaned and reassembled wrong.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
The short version
Where this figure comes from
A starting point for built-in appliances in South Florida, published so the number is not a mystery until somebody is standing in your kitchen.
Starts at
from $155
After a diagnostic from $95, which comes off the bill when you go ahead with the work.
or call (305) 902-4477
It is not
A quote for your unit
Exact cost
Confirmed after the on-site diagnostic
Warranty
On the labor we performed
What moves it
Why two of the same job cost different amounts
These apply at the same time and in both directions. Which of them is true of your kitchen is what the on-site diagnostic settles.
-
Whether it is a part at all
A cap seated wrong, blocked ports or moisture after a wash are the commonest causes and none of them is a component. Where that is the answer, the visit fee is the cost.
-
One burner or all of them
One is that burner's electrode, valve or thermocouple. All of them is the ignition module or the supply, and that is a different figure.
-
Gas type and conversion history
A machine converted between natural gas and LPG has injectors and a low-flame adjustment that may never have been set right.
-
Rangetop or cooktop
The same repair, different access. A professional rangetop has its controls on a front panel and comes apart differently from a flush cooktop set into stone.
The work itself
What we actually do
The job behind the figure: what it involves, when a symptom points at it, and what we check first.
-
from $155 Range burner & ignition repair
A burner that clicks and will not light, lights and drops out, or holds on high and dies at simmer. Three complaints, three different answers — and on this maker the low-setting one is the article its own owners link most, which tells you where these machines actually fail.
- Spark, gas and flame sensing told apart before anything is ordered
- Caps and ports checked first — the commonest cause by a distance
- Thermocouples tested at a low flame, where they actually fail
In more detail
About Fisher & Paykel range burner & ignition repair cost
Why this row is set low
Because a large share of these calls end without a part. A burner cap put back a fraction proud after cleaning will click and never light, every time, and the fix costs nothing. Blocked ports and moisture after a wash are the next two. A shop that reaches for an ignition module first is not looking.
The low-setting version
A flame that holds on high and dies at simmer is the article this maker's own owners link most, and it is usually ports around the small-flame side or a flame-sensing thermocouple that no longer holds a small flame open. That is a real part and it sits in the middle of this row.
The market range
Burner and ignition work across South Florida sits in a researched market range of roughly $150 to $380 parts and labor. Ours starts at $155, and exact cost is confirmed after an on-site diagnostic.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about fisher & Paykel range burner & ignition repair cost
It started right after I cleaned the cooktop.
Then it is very likely the cap and it is very likely free. Lift it off cold and let it drop into place rather than pressing it down. If that fixes it, the visit was not needed and we would rather tell you on the phone.
Do you fix all the burners or just the one?
All of them are proved before we leave, high and low. A range with one burner repaired and another about to do the same thing is a second call nobody wanted, and the setup is most of the cost either way.
Is a rangetop more expensive than a cooktop?
Not for the burner work itself. What differs is access on some models, and it is established at the diagnostic rather than assumed.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name