Error code
Fisher & Paykel dishwasher error code A11
Fisher & Paykel dishwasher error code A11: The element has overheated because of soil build-up on it. What the maker publishes about it, what you can try, and when it needs a technician.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code A11, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
A11
The element has overheated because of soil build-up on it.
or call (305) 902-4477
What it narrows down to
The element has overheated because of soil build-up
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the dishwashers and dishdrawers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Water supply error: the drawer did not fill.
The drawer cannot drain: the filter may be
The spray arm has loosened or come off
The machine has detected excess foam in the
The Sanitize cycle did not reach the temperature
No water: the machine did not fill.
Drain error: the waste water is not draining
Water temperature error.
Alarm error on temperature sensing.
Alarm error.
Flooding: the flood switch has been activated.
Water flow error.
The same digits mean different things on different equipment. Search the full code list
In more detail
About Fisher & Paykel dishwasher error code A11
What A11 means on a dishwasher
The element has overheated because of soil build-up on it. This is the maker's own wording from the DishDrawer dishwashers user guide, not an interpretation of it.
What to do
- Press once to stop the beeping, then again to clear the code.
- Remove the rack, spray arm, filter and filter plate to reach the element.
- Clean the element with a soft, damp cloth, then clean and refit the rack, spray arm, filter and filter plate.
- Run a medium cycle with detergent and no dishes, and clean the filter regularly afterwards.
What the repair is
Conditions in this family end at Dishwasher wash performance repair more often than anywhere else. The figure on that page is a starting point; the exact cost is confirmed after an on-site diagnostic and agreed in writing before anything is opened.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards